Salient Features:

• Unit Conversion,
• Statistical Report up to 10 Tests with Mean Value
• Standard Deviation & Co-efficient of Variation.
• Bar graph facility & Printer Port.
• Pre-Load setting & Auto Breaking,
• Auto Calibration for Load & Displacement
• Over Load and Over Travel Protection
• Drives Interfacing facility for Speed control

Specification:

• Application – Suitable for any type of Testing Machines
• Display – 16 x 2 line alphanumeric LCD display with back lit
• Transducers – Load cell / Pressure Transducers /Transmitters for Load & Optical Encoder for Displacement,
• Extensometer connectivity
• Computer Interface – Through RS 232 C Connectivity
• Calibration – Auto Calibration.
• Output & Input – 4 Relay outputs & 4 digital inputs.
• Function mode – Unit conversion & Peak hold function.
• Test conducted – Tensile Test, Compression Test, Shear Test & Bending Test,
• Flexural Strength Test, Peel Test, S. Bending Test
• Graph plotting – Load V/s Displacement, Displacement V/s Time,Stress V/s Strain, Load V/s Time, Load V/s Deflection

PRC offer Digital UTM Controller system of all types of Testing Machines i.e. Universal Testing Machines, Compression Testing Machines, Tensile Testing Machines, Wood Testing Machines, Yarn & Fabric Testing Machines with indigenously developed advance software and reliable transducers i.e. Load cell, Pressure Transmitters or Rotary Encoders.

Salient Features:

• Unit Conversion,
• Statistical Report up to 10 Tests with Mean Value Standard
• Deviation & Co-efficient of Variation.
• Bar graph facility & Printer Port.
• Pre-Load setting,
• Auto Breaking,
• Auto Calibration for Load & Displacement
• Over Load and Over Travel Protection
• Drives Interfacing facility for Speed control

  Application:

  Suitable for Universal Testing Machines, Compression Testing Machines, Tensile Testing Machines, Wood Testing Machines, Yarn & Fabric Testing Machines

  Specification:
  

• Display 16 x 2 line alphanumeric LCD display with back lit Transducers Load cell / Pressure Transducers /Transmitters for
• Load & Optical Encoder for Displacement,
• Extensometer connectivity Computer Interface Through RS 232 C Connectivity Calibration Auto Calibration. Output 4 Relay outputs. Digital Input 4 digital inputs. Function mode Unit conversion & Peak hold function.

PRC offers Displacement transducers/sensors such as Load cells, LVDT or Optical Shaft Encoder for load and displacement measurement in UTM conversion. These are exclusively made to use with UTM considering the very specific need of application to do the accurate measurement of both the parameters. PRC has developed a reliable source of raw material for these sensors and extra care is taken while manufacturing these sensors. These are produced in line of industrial standards for ensuring the long performance.

Salient Features:

• Multiple applications
• Inductive and optical transducers
• Highly valued for their compact designs
• Corrosion resistant
• User friendliness
• Longer service life
• Input & output isolation

The load directly indicated in kilograms or Newton. We will provide the Window based software which gives the different measurement parameter and the graph between load v/s elongation or stress v/s strain. The software have

facility to store the data in memory and have the facility to indicate the break load, yield load elongation at break load and yield load the software have the facility to automatically calculate the yield, tensile strength and compression strength The report can be printout by using proper printer.

The elongation of the test specimen is measured on a digital indicator fixed on the frame of the tester, which indicates the distance between the grips. The variable speed model speed is vary by a knob fixed on the panel and the speed also digitally indicated on the control panel of the instrument or by simply types the speed on the monitor of the computer. Different model have speeds suitable for testing different materials.

Various built in safety arrangements such as over travel protection, are provided. The tester is finished in painting, powder coating and bright chrome/zinc plating to give the apparatus a corrosion resistant finish. It is supplied with electrical, that include micro switches, push buttons, and contactors for safe and convenient operation.
A variety of grips suitable for holding different materials are offered as optional accessories.

Technical Data:

• Machine Capacity – 50 Kg x 0.1 Kg
• Testing range – 25 Kg
• Speed – Variable from 0.5 to 50 mm/minute
• Traverse – 0 to 500 mm
• Motor – Servo motor
• Power required – 230 V AC, 1500 W, Single phase

Tensile, compression, shear strength, bending strength and elongation are the prime characteristics of most of the raw materials, whether they are metals: or non-metals: such as Rubber, textiles, plastic, and paper: or finished products such as rods, wires, ropes, yarns, belts etc.

These properties very often play the major role in determining the suitability of any raw material for any specific application. It is therefore, of utmost importance to determine these characteristics accurately, conveniently, and quickly.
The “PRC” Universal Testing Machine provides a relatively inexpensive way for determining the Tensile, compression, shear strength and elongation of variety of raw materials such as rubber, leather, fabric, plastics, Belts, wires etc.

Salient features:
Unit Conversion, Statistical Report up to 10 Tests with Mean Value Standard Deviation & Co-efficient of Variation. Bar graph facility & Printer Port. Pre-Load setting & Auto Breaking, Auto Calibration for Load & Displacement Over Load and Over Travel Protection Drives Interfacing facility for Speed control The following tests can be conducted precisely and graphs can be plotted with the computerized model such as Tensile Test, Compression Test, Shear Test & Bending Test , Flexural Strength Test, Peel Test & S. Bending Test

The equipment is fitted with a motor driven screw mechanism, which increases fluid displacement on the lower side of the diaphragm at a specified rate. The equipment is fitted with an arrangement, which automatically brings down the pressure and stops the motor on completion of the test cycle. A maximum reading type pressure gauge (or pressure sensor and digital indicator with peak hold and tare facility in digital model) gives the bursting pressure.

The equipment is raggedly designed to give a long & trouble free life. The components are brighter chrome plated or painted in metallic paint to give the tester an aesthetic appearance.

Technical Specification:

• Capacity : 0 to 50 kg/cm²
• Least Count : 0.1 kg/cm² least count
• Opening in upper clamp : 30.5 mm diameter
• Opening in lower clamp : 38.1 mm diameter
• Rate of fluid displacement : 95 cc/ minute
• Test fluid : Glycerin
• Gear Box : Worm reduction type
• Power required : 220 VAC, 500 W, 50 Hz single phase
• (Other power option also available)
• Clamping : Manual

Related Standards:

BS 3424/3137, ISO 2758/2559/3303/3669, ASTM D 3786, ASTM D 774, ASTM D 774, D774 M 96A – Paper, T 810 om-92 (Corrugated & Solid Fiberboard)